ENGLISH 
CHINESE 
CAMEO 3 Firmware bricked
- Blade doesn't lift OR doesn't lower during the cutting process
- CAMEO 3 Firmware bricked
- Cutting vertical line only (motor not moving side-to-side)
- How To Use The New Silhouette Cork Sheets
- Images are not properly aligned
- LCD screen not in English
- Left-hand roller not lifiting on Silhouette CAMEO®
- Noise issue correspondenc
- Silhouette starts cutting when powered on (prior to job)
- Silhouette unit not powering on
- USB files cannot be read on CAMEO touchscreen
- What You Should Know About the Cork Sheets:
CAMEO 3 Firmware Issue
If concerns are experienced where the CAMEO 3 machine becomes bricked (unusable due to a bad firmware update process), please do the following to reset the process and reinstall the firmware anew:
- Unplug the CAMEO 3 power cord from the machine.
- Hold the power button down on CAMEO 3 and then plug the power cable into CAMEO3 . Continue to hold down the power button until the LCD screen turns light blue.
- Launch the Firmware Update Tool.
- Once you see the window “Please connect the CAMEO and power it on”, press [Ctrl]+[Shift] on your keyboard and then click the [OK] option on the screen as these keyboard buttons are being held down.
